Dear Inner Blogger,
You’ve always wanted to start a blog and you have. So kudos for at least starting one again for the umpteenth time. I encourage the voice that speaks to me in those moments when I daydream or even when I’m in the middle of doing an undesirable task to let loose. I promise it’ll be OK. I believe we all spend so much time worrying about what other people might think. The truth of the matter is that “other people” aren’t really thinking about us anyway. They’re too busy thinking of how they want to perceived by “other people”.
Will I have time to blog? Yes…. you will have time to blog because remember this is something you want to do. Think of all the fun you’ll have becoming a curator of the world of me.
Will I have an audience? Well I’m not sure of that but I know you’ll have at least one reader. Let’s just get started and commit to a blogging schedule.
We’re a team and I’m on board 1000%. There’s so much we’re going to learn and I’m excited! Let’s go!
For my very first post, I’m taking the blog writing challenge for this week. By the way, I’m taking poll about this very post. Please be sure to vote at the bottom of this post. Thanks! I’ll get started. Have you ever wondered how to create a method to analyze catalysts? What’s that?…did you say no? Well today’s your lucky day!
I’ll begin with sharing what a catalyst is. A catalyst causes a chemical reaction to go faster. I have the awesome opportunity to analyze catalysts everyday. My job is to analyze the composition of a catalyst! Can you get excited!
In order to make this possible I first must have a method developed. Today, I get the chance to share this information with you. That’s right. Y-O-U. This is valuable. You just never know when you’ll need how to do this. So here goes…
First you’ll need to gather information about the catalyst you are to analyze. For example which chemical elements do you expect the catalyst to be made of. Secondly, you’ll need to know how much or the expected concentration ranges of each element. This information can be found most likely from a formulation or a recipe by a very brilliant PhD. Once all the above has been established, you’re ready to prepare your calibration standards for your method. You can also purchase premade standards with certified values that meet the required concentration ranges.
Ok are we still awake? The next step is to create your method on the instrument. For this purpose, you will be using a Wavelength Dispersive Xray Fluorescence instrument. Wait?…a what-what? No worries it’s not as bad as it sounds and I will spare all the juicy the details about this piece of equipment…think of it as a really expensive scanner. Anyway once your method is created, you set it based on what your standards read. The instrument will record or scan the standards according to whatever known value that you’ve assigned for each standard. Each standard is then correlated by an intensity from the instrument.
If you’re still reading this, you’re almost done. Next, check for any matrix effects, elemental overlaps, and apply corrections to your calibrations. Once this is complete, use a check sample with known values and measure it against your newly created method. Voila! You’ve just created a method to analyze catalyst. Now is the data correct? In theory, it should be but in the real world now that’s a different post entirely.
*Note this is a very abbreviated procedure. It actually takes several days, weeks, and several months to complete this task. How come so long you say?…I don’t know but I will let you know when I finish the method I’ve been working on since last December.